News

Key takeaways

  • Defense: two-component epoxy adhesives in aluminum cartridges and greases in airtight cartridges, for equipment operating in temperatures ranging from -40 °C to +70 °C.
  • Automotive: A product that is uniform from the first gram to the last, with precisely calibrated elasticity to withstand vibrations.
  • Aeronautics: resistance to pressurization cycles and wide temperature ranges, and comprehensive traceability for each batch.
  • Construction: durable containers, 310-ml cartridges, and 5-liter buckets, designed for easy use on construction sites.

Since 1991, Etraves has been packaging products with demanding technical specifications: epoxy adhesives resistant to -40°C, greases capable of withstanding millions of rotation cycles, and sealants that retain their elasticity after years of storage. Our company has gradually established itself as a specialist in the packaging of industrial products for sectors with specific requirements.

Automotive, aeronautics, public works and defense: four worlds with distinct constraints that call on Etraves' skills for different reasons.
How can we meet such varied specifications? The answer lies in in-depth technical expertise and precise knowledge of the specific features of each sector.

Defense equipment: when strength comes first

The defense sector imposes constraints that few industries are familiar with. Vehicles and equipment used in conflicts are subjected to extreme stress: intense vibrations, brutal temperature variations from -40°C to +70°C, mechanical shocks, exposure to abrasive dust and hydrocarbons.

In this rather demanding environment, the two-component epoxy glue packaging becomes strategic. Structural assembly of armor, fixing of sensitive electronic equipment or emergency repairs in the field require high-performance adhesives. Etraves packages these formulations in 310 ml aluminum cartridges, a material chosen for its watertight barrier against humidity and oxidation: two degrading factors for epoxy adhesives.

Packaging grease for this sector also presents a technical challenge. Turret mechanisms, transmission systems, and undercarriage bearings operate under conditions where even the slightest failure can jeopardize the mission. High-performance greases packaged by Etraves, a specialist in industrial packaging, in hermetically sealed cartridges ensure consistent lubrication even after months of storage under harsh conditions.

Traceability is another absolute must. Each packaged batch is carefully monitored, enabling us to instantly trace the origin of each component should the need arise.

Automotive: the need for industrial speed

The automotive industry presents a complex equation: produce millions of units while guaranteeing high individual reliability. This constraint has a direct influence on packaging choices.

Visit packaging of tubes illustrate this problem. On a car assembly line, a worker applies a bead of sealant in less than 30 seconds. The 300 ml tube he uses must deliver a homogeneous product from the first to the last gram, with no viscosity variations, no air bubbles and no phase separation. Etraves masters these constraints thanks to systematic filling techniques and quality controls.

Vibrations are the other major specificity of automobiles. A modern vehicle undergoes around 50 million vibration cycles over its lifetime. Structural adhesives packaged for this sector therefore need to have a calibrated elasticity, neither too rigid (risk of cracking) nor too flexible (loss of efficiency). This fine-tuning requires glue packaging that preserves the rheological properties of the formulations.

Temperature also poses its own challenges. From -30°C in Scandinavia to +60°C under the hood in summer, packaged products have to maintain their performance. Etraves adapts its packaging materials according to destination: aluminum tubes for extreme climates, HDPE plastic for standard applications.

Aeronautics: perfection as standard

While the automotive industry still tolerates a few approximations, aeronautics imposes strict standards. An airliner carrying 400 passengers at an altitude of 10,000 meters leaves no room for improvisation.

Pressure constraints are the first specificity of this sector. At cruising altitude, the pressure difference between the inside and outside of the cabin reaches 0.8 bar. Seals, adhesives and mastics must maintain their tightness despite these repeated pressurization-depressurization cycles. Glue packaging for the aeronautics industry takes this into account right from the design stage: cartridges pressure-tested cartridges, specific cyclic-resistant formulations, reinforced quality controls.

Temperature ranges in the aviation industry far exceed those in other sectors. The difference between the ground temperature in Riyadh (+50°C) and the outside temperature at cruising altitude (-55°C) is 105°C. The landing gear bearing greases and flap mechanism lubricants manufactured by Etraves undergo rigorous qualification tests that replicate these conditions.

Aeronautical traceability can take this concept one step further. Each tube, each cartridge carries a number which can be traced back to the date of packaging, the operator who carried out the task, the machine parameters of the moment, even the weather conditions of the day.

Construction: robust and easy to use

After the controlled environments of aeronautical design offices, construction sites present other constraints. Here, packaged products must withstand rough handling, falls, concrete splashes, climatic variations and use by operators who are not always careful.

Tube packaging for the construction industry is all about robustness. Thick-walled plastic tubes, impact-resistant screw caps, indelible labeling: every detail counts to ensure product durability on the job site. A tube of mastic that has fallen from scaffolding must continue to function perfectly.

Packaged volumes are adapted to building and civil engineering applications. Where the aeronautics industry uses precise, measured quantities, the construction industry consumes large quantities. Etraves offers 310-ml cartridges cartridges for pneumatic guns, for rapid application of long sealing beads, and 5-liter pails for roller or spatula applications.

Ease of use is also a priority. A bricklayer isn't going to read a 20-page manual before using his product. Packaging must be intuitive, with clear color coding, easy-to-understand pictograms and simple opening systems, even when wearing protective gloves.

Multi-disciplinary technical expertise

Today, Etraves' expertise is applied to manufacturers in all sectors. Whether you're developing a new composite material for aeronautics, a structural adhesive for the automotive industry, a high-performance sealant for the construction industry or a lubricant for defense applications, our rigorous standards apply everywhere!

To find out how each of our packaging solutions can meet the specific requirements of your industry, please contact our sales department directly at 03 44 26 89 40

Request
Contact

You have a project, you can expose it to us,
we will propose you a solution

Navigation